3 Common Mistakes That You Should Avoid When Hiring A Concrete Leveler In Ghana

‍

If you have just purchased or rented a house or office space and need to renovate it, one of the first things that comes to mind is the type of flooring. Concrete flooring is common in newer buildings because it’s long-lasting and easy to maintain. However, most concrete floors are unlevel due to minor cracks, uneven subfloors, or improper installation. To keep your renovation budget from going over, you should hire a concrete leveler in Ghana. This professional will help you identify the issues with your concrete floor and offer solutions for repair. Here are three red flags that indicate you should not hire a certain concrete leveler and four tips on how not to make that mistake again:

Concrete Floors Should Not Be Very Dark

If the concrete floors have been in place for more than a year, they should have a light grey colour. If they’re darker, this may indicate that there’s an excess of cement in the mixture. While an extra cement mixture will help the floor last longer, it will also make it more likely to stain. Most spills will soak into the concrete and permanently stain it. If the concrete flooring has stains, it can be very challenging to remove. Concrete polishers have the right tools to grind down the concrete, but they can only do this if the concrete is not too dark. If you don’t want to hire a concrete polisher because you want to avoid the mess, you can use acid to remove the stains. However, this process is more dangerous and may damage the concrete.

Concrete Floors Should Not Have an Oily Smell

If the concrete has a strong smell of oil, it may indicate that the mixture contains too much Portland cement, which is a type of cement used to make concrete. The excess cement makes the concrete stronger, but it may also make the concrete smell like oil. An oil smell may also indicate that the concrete has been treated with admixtures. Admixtures are additives that can increase the strength of concrete, reduce water in the mixture, and affect the appearance of the cement. If you clean the concrete with a strong acid, the concrete may lose its admixtures and smell like oil. To avoid dealing with an oil smell down the road, treat the concrete with a low-cement mixture. This will reduce the smell and make the concrete easier to clean. However, if you have already poured the concrete floor and smell oil, you will have to chip it away. This is a time-consuming process that will be difficult to complete without damaging the concrete.

You Should Feel No Vibration When You Step on The Floor

During the concrete leveling process, the concrete leveler will vibrate the floor with a jackhammer. This can be a good thing if the vibration disappears after a few minutes. If the vibration is still there after a few hours, it means that there’s something wrong with the concrete. Vibration can occur if the subfloor is not level, the concrete mixture is not right, or the concrete did not cure long enough before being used for the floor. If the vibration is gone by the next day, it’s likely that the concrete leveler did everything right. However, if the vibration is still there after a few days, you should hire another concrete leveler. If you don’t, you may have to replace the concrete because it didn’t cure properly. Even though curing is a normal part of the concrete construction process, you can speed it up by increasing the temperature and humidity in the room with the concrete.

Hiring A Concrete Polisher Means There Are Deep Scratches On The Surface

A concrete polisher uses a chemical that eats away the surface of the concrete. This may be necessary to remove stains, but it also leaves scratches on the concrete. If the concrete has scratches, it will not be level and will not look good. You may need to repour the concrete and pour it again with additional cement. Polishing the concrete can be expensive, but it’s a good solution if the concrete floor has stains. However, it’s best to avoid this mistake in the first place. Choose a concrete leveler that has an edger. An edger is a piece of equipment that removes only the cement on the surface.

When You’re Interviewing A Concrete Leveler, Ask About The Tools They’ll Use

No concrete leveler uses the same tools for every job. Depending on the condition of the concrete, you may need to hire a concrete polisher or a concrete grinder. The concrete grinder is a powerful tool that can grind the concrete to the desired level. However, it can also damage the concrete if not used properly. A concrete polisher uses a chemical solution to remove the cement from the concrete. Before hiring a concrete leveler, ask about the tools that they’ll use and how they’ll use them. This will help you decide if they’re the right concrete leveler for your job.

Make Sure To Hire A Company That’s Fully Licensed And Certified

All concrete levelers should be licensed and have insurance. However, not all of them are certified. Make sure that the concrete leveler that you hire is certified by the American Concrete Institute. This will ensure that the concrete leveler knows proper safety procedures and can complete your job correctly. It’s important to avoid these common mistakes when hiring a concrete leveler. If you hire too early, you’ll end up spending more money hiring another concrete leveler. If you don’t follow these tips, you may end up with an unlevel and damaged floor even after a second concrete leveler. With these tips, you’ll be able to hire a concrete leveler who will provide you with a level and safe floor.